git add only modified changes and ignore untracked files

asked13 years ago
viewed511.2k times
Up Vote853Down Vote

I ran "git status" and listed below are some files that were modified/or under the heading "changes not staged for commit". It also listed some untracked files that I want to ignore (I have a ".gitignore" file in these directories).

I want to put the modified files in staging so I can commit them. When I ran "git add .", it added the modified files AND the files I want to ignore to staging.

How do I add only the modified files and ignore the untracked files if presented with the git status below.

Also, are my ".gitignore" files working properly?

$ git status
# On branch addLocation
# Changes not staged for commit:
#   (use "git add <file>..." to update what will be committed)
#   (use "git checkout -- <file>..." to discard changes in working directory)
#
#       modified:   someProject/path/domain/viewer/LocationDO.java
#       modified:   someProject/path/service/ld/LdService.java
#       modified:   someProject/path/service/ld/LdServiceImpl.java
#       modified:   someProject/path/web/jsf/viewer/LocationFormAction.java
#       modified:   someProject/war/WEB-INF/classes/message/viewer/viewer.properties
#       modified:   someProject/war/page/viewer/searchForm.xhtml
#
# Untracked files:
#   (use "git add <file>..." to include in what will be committed)
#
#       .metadata/
#       someProject/build/
no changes added to commit (use "git add" and/or "git commit -a")

12 Answers

Up Vote10Down Vote
Grade: A

Ideally your .gitignore should prevent the untracked (and ignored) files from being shown in status, added using git add etc. So I would ask you to correct your .gitignore You can do git add -u so that it will stage the modified and deleted files. You can also do git commit -a to commit only the modified and deleted files. Note that if you have Git of version before 2.0 and used git add ., then you would need to use git add -u . (See "Difference of “git add -A” and “git add .”").

Up Vote9Down Vote

Ideally your .gitignore should prevent the untracked (and ignored) files from being shown in status, added using git add etc. So I would ask you to correct your .gitignore You can do git add -u so that it will stage the modified and deleted files. You can also do git commit -a to commit only the modified and deleted files. Note that if you have Git of version before 2.0 and used git add ., then you would need to use git add -u . (See "Difference of “git add -A” and “git add .”").

Up Vote9Down Vote
Grade: A

Adding Modified Files and Ignoring Untracked Files

Based on the git status output, it seems like you have modified several files and have some untracked files in your project. You want to add only the modified files to staging and ignore the untracked files.

Here's how to achieve that:

  1. Remove untracked files:

    • To remove the untracked files from the current branch, run the following command:
git clean -f
  • This will remove untracked files from the working directory but will not affect any changes to tracked files.
  1. Add modified files to staging:

    • To add the modified files to staging, run the following command:
git add .
  • This will add all the modified files to the staging area.
  1. Commit changes:

    • Once the modified files are added to the staging area, you can commit them using:
git commit -m "Your commit message"
  • Here, -m allows you to provide a commit message describing the changes you are making.

Regarding your .gitignore file:

Your .gitignore file should be working properly as it already lists the .metadata and someProject/build directories, which will be ignored by git add. However, if you have any additional files that you want to ignore, you can add them to the .gitignore file in the same directory as your git status output.

Additional notes:

  • It is important to note that running git clean -f will permanently remove untracked files from the working directory, so use this command cautiously.
  • If you have any changes to the .gitignore file itself, you need to run git add . again after making the changes.

Here's an updated version of your git status output after following these steps:

$ git status
# On branch addLocation
# Changes staged for commit:
#   (use "git commit -m " to describe the changes)
#
#       modified:   someProject/path/domain/viewer/LocationDO.java
#       modified:   someProject/path/service/ld/LdService.java
#       modified:   someProject/path/service/ld/LdServiceImpl.java
#       modified:   someProject/path/web/jsf/viewer/LocationFormAction.java
#       modified:   someProject/war/WEB-INF/classes/message/viewer/viewer.properties
#       modified:   someProject/war/page/viewer/searchForm.xhtml

# Untracked files:
#
#
#       .metadata/
#       someProject/build/
no changes added to commit (use "git add" and/or "git commit -a")

Now, the untracked files are removed and the modified files are staged for commit. You can proceed to commit the changes with a descriptive message.

Up Vote8Down Vote
Grade: B

To stage only modified changes from files not tracked by Git but ignore untracked ones, you should use "git add -p". This command allows you to interactively select what you want to stage in a more granular manner.

In your case, if you type "git add -p" and then press enter:

  1. Git will display the file content for you one commit at a time (similar to how git log does), giving you options on each hunk. The commands that appear in this view are 'y' or 'n' for adding it, 'e' for more options, 'a' for adding this hunk and 'd' for skipping it.
  2. If a file is modified but not tracked by Git (like your *.gitignore files), you should answer with the letter 'n' to skip staging those changes. This way, git won’t include them in the commit even if you use "git add .".
  3. For other files that have been modified, continue following these prompts and only hit 'y' or 'n' at each step.

Remember *.gitignore is not a file that needs to be staged; rather it's a list of ignored patterns for git. They are useful when they’re modified, but won’t automatically reflect in your repo until you reload the ignore rules with 'git rm -r --cached .', followed by 'git add .'.

Up Vote8Down Vote
Grade: B

Sure. Here's how you can address the issue:

  1. Stage only the modified files:

    Use the git add command with the -n option to add only the modified files, excluding untracked files. This command allows you to specify a pattern of files or directories to add, including the ones in your .gitignore files.

    For example, to add only the modified Java files and ignore the untracked .metadata file, use the following command:

    git add -n "*.java" .gitignore
    
  2. Ignore untracked files using .gitignore:

    Review your .gitignore file and make sure that it is configured to ignore the untracked files. If necessary, edit the .gitignore file to match the exact path to the untracked files.

  3. Verify that your .gitignore files are working correctly:

    To ensure that your .gitignore files are working properly, you can run the following command:

    git status -s
    

    This command should display a list of all files tracked by Git, including those in your .gitignore files. If there are no discrepancies, this indicates that your .gitignore files are functioning as intended.

  4. Proceed with adding the modified files:

    With the modified files and the .gitignore rules applied, you can now use the git add . command to add only the modified files and ignore the untracked files.

Additional Tips:

  • Use git status regularly to monitor the changes in your project.
  • Use the --dry-run option with git add to see what files will be added before you actually add them.
  • Consider using a different version control system that offers better support for managing untracked files, such as Git LFS.
Up Vote8Down Vote
Grade: B

It looks like you want to stage only the modified files and not the untracked files. When you run git add ., it adds all the changes including untracked files to the staging area.

To add only the modified files, you can run git add -u or git add -u .. This will stage all the changes in tracked files, but it will not touch the untracked files.

Regarding your .gitignore files, they should work properly if they are in the correct directories and are formatted correctly. If you want to ignore the .metadata/ and someProject/build/ directories, make sure you have those exact paths in your .gitignore files. Also, keep in mind that if you have already tracked a file and then add its path to .gitignore, it will not be ignored unless you remove it from the staging area first.

Here's an example .gitignore file for your case:

# Ignore .metadata directory
.metadata/

# Ignore build directory
someProject/build/

If you still face issues, you can check if the .gitignore file is working by running git check-ignore -v <file-path>. This command will show you which rule in .gitignore is causing the file to be ignored. If <file-path> is not ignored, it will not output anything.

Up Vote7Down Vote
Grade: B

Ignoring Untracked Files

Your .gitignore files should be working correctly as they prevent untracked files from being added to the staging area. To ensure they are working, check the following:

  • Make sure the .gitignore files are in the same directory as the untracked files.
  • Verify that the patterns in the .gitignore files match the untracked files.

Adding Only Modified Files

To add only the modified files to the staging area while ignoring the untracked files, use the following command:

git add -u

The -u flag tells Git to update the staging area with only the modified files that are already tracked by Git. This will ignore the untracked files and add only the modified files to the staging area.

Example

Using your provided git status output, you can run the following command to add only the modified files:

git add -u someProject/path/domain/viewer/LocationDO.java
git add -u someProject/path/service/ld/LdService.java
git add -u someProject/path/service/ld/LdServiceImpl.java
git add -u someProject/path/web/jsf/viewer/LocationFormAction.java
git add -u someProject/war/WEB-INF/classes/message/viewer/viewer.properties
git add -u someProject/war/page/viewer/searchForm.xhtml

Note:

If you want to add all modified files in the current directory and its subdirectories, you can use the following command:

git add -u .

This command will recursively add all modified tracked files to the staging area while ignoring untracked files.

Up Vote6Down Vote
Grade: B

Hi there! Sure, I'd be happy to help with this. To get the modified files only, you'll want to modify the git add command so that it ignores any untracked or unindexed changes by using the "-U" (unstaged) flag. Here's an example:

git add --no-commit -U .

This will only include the modified files from your staging directory in git staging, which can be viewed via "git status". As for your ".gitignore" file, if it has the correct syntax and logic for what files to ignore, then it should work as expected. The command below shows you how you can see all the files that would be added by "git add ." with "-a":

$ git ls-files --name-only .

This will list out any files that are being considered for the current commit, which should include only files that were modified or are currently staged for staging.

Up Vote5Down Vote
Grade: C

Great, I'd be happy to help you with your issue!

To answer your first question, you can use the --modified flag with git add to only stage the files that have been modified. Here's an example of how you could do this:

git add --modified someProject/path/domain/viewer/LocationDO.java

This would only stage the file someProject/path/domain/viewer/LocationDO.java that has been modified.

Regarding your second question, it seems like your .gitignore files are working properly and the files listed under "Untracked files" in the git status output should be ignored. If you're not sure why some files are being included or excluded from Git tracking, you can use the --verbose flag with git add to see a more detailed explanation of what's happening:

git add --verbose someProject/path/domain/viewer/LocationDO.java

This would show you the exact files that are being added or ignored, along with information about why they're included in the output.

I hope this helps! Let me know if you have any other questions.

Up Vote5Down Vote
Grade: C
git add someProject/path/domain/viewer/LocationDO.java
git add someProject/path/service/ld/LdService.java
git add someProject/path/service/ld/LdServiceImpl.java
git add someProject/path/web/jsf/viewer/LocationFormAction.java
git add someProject/war/WEB-INF/classes/message/viewer/viewer.properties
git add someProject/war/page/viewer/searchForm.xhtml
Up Vote0Down Vote
Grade: F

To add only the modified files and ignore the untracked files, you can use the following command:

git add someProject/path/domain/viewer/LocationDO.java \
      someProject/path/service/ld/LdService.java \
      someProject/path/service/ld/LdServiceImpl.java \
      someProject/war/WEB-INF/classes/message/viewer/viewer.properties \
      someProject/war/page/viewer/searchForm.xhtml

This command adds only the specified files to the staging area. Untracked files, such as those listed under "Untracked files", will not be added.

Regarding your .gitignore files, they seem to be working properly if they are ignoring the files that you want ignored and listed as untracked in your Git status output. If you find that some files are not being ignored despite being in your .gitignore file, make sure the paths in the file match the directories of the unignored files exactly (including case sensitivity), and that the files themselves are not being tracked by Git (i.e., they should not be listed under "Changes not staged for commit"). If the problem persists, you may want to check the Git documentation or ask a new question on Stack Overflow for more specific guidance.

Up Vote0Down Vote
Grade: F

To add only modified files to staging and ignore untracked files, you can use the git add command twice, once for the modified files and once for the untracked files.

$ git status
# On branch addLocation
# Changes not staged for commit: 
#   (use "git add <file>..." to update what will be committed)  
#   (use "git checkout -- <file>..." to discard changes in working directory)  
#   
#       modified:   someProject/path/domain/viewer/LocationDO.java
#       modified:   someProject/path/service/ld/LdService.java
#       modified:   someProject/path/service/ld/LdServiceImpl.java
#       modified:   someProject/path/web/jsf/viewer/LocationFormAction.java
#       modified:   someProject/war/WEB-INF/classes/message/viewer/viewer.properties
#       modified:   someProject/war/page/viewer/searchForm.xhtml

# Untracked files:

#    use "git add <file>..." to include in what will be committed)

#


$ git status
# On branch addLocation
# Changes not staged for commit: 
#   (use "git add <file>..." to update what will be committed)  

#   (use "git checkout -- <file>..." to discard changes in working directory)  
#   
#       modified:   someProject/path/domain/viewer/LocationDO.java
#       modified:   someProject/path/service/ld/LdService.java
#       modified:   someProject/path/service/ld/LdServiceImpl.java
#       modified:   someProject/path/web/jsf/viewer/LocationFormAction.java
#       modified:   someProject/war/WEB-INF/classes/message/viewer/viewer.properties
#       modified:   someProject/war/page/viewer/searchForm.xhtml

# Untracked files:

#    use "git add <file>..." to include in what will be committed)


$